Plumbers Derby – 5 Most Common Plumbing Issues and How to Fix them

0 Comments

5 Most Common Plumbing Issues and How to Fix them

You must be one of those homeowners who have taken on a new home only to have it end up with a house plagued with plumbing problems and other issues? Or, do you perhaps live in your home long enough already but still aren’t familiar with how the plumbing system is working? Either way, we hope that you will not ignore the signs pointing out to plumbing problems that are starting to get out of control.

And if you’re a homeowner who isn’t sure which company can offer quality work and also keep your own budget in mind, then we recommend you to start looking around for trusted professional plumber in derby. Check out these 5 most common plumbing issues that should be taken care of immediately before getting worse and paying more for the service.

High Water Bills

When an individual is starting to find that their water bill has been increasing every month, it’s a good idea to figure out how and why this is happening. The plumbing problems are generally the main cause of the high fees. Some of these issues may include leaky pipes which can usually be identified by the sound these problems make when water runs through them, a toilet that leaks from its cistern and contact with other pipes, or a dripping faucet in the bathroom or kitchen. 

When you pay your water bills, it’s critical to consider whether or not the timing of your payments might be at all connected with the costs. For instance, if you are more likely to use more water during the rainy seasons or when there are guests staying with you for a lengthier period of time, this can cause your bill to increase more than usual. But if paying attention to such factors doesn’t fix your issue, it’s probably a good idea to call a plumbing contractor and ask for help.

Unusual noises

If you hear strange noises like cracking, banging, gurgling, or humming when there is water flowing in a plumbing system, then somebody should check to see what the cause is. These noises may be caused if the water pressure within the pipes is too high because of problems with air bubbles or water hammers.

You can fix this problem by adjusting your taps to slow down the flow of water within your plumbing. Luckily, there is a problem that you can solve by yourself with some adjustments.

One of the most common problems with plumbing is gurgling. This occurs when there is a blockage in the pipes resulting in water sloshing around as it travels through. When this happens you may hear an awful sound like a strangled duck choking to death on its own tongue. To deal with this, you need to get an expert plumber in to help and fix the problem because it’s usually hard to reach and get at from behind the walls and ceilings.

Another common problem is whistling. This can be caused by wear and tear or ageing non-working parts that go rogue when they flap about doing what they’ve been told not to do. The best way to prevent problems with whistling is early detection as when engineers are on hand, they can pinpoint exactly what’s going on before things get out of control and your kitchen starts losing pressure every time you turn a tap.

Slow drains

Blocked pipes make it impossible for water to get through them. Partial blockages are usually cleared with the use of a plunger, but this is a temporary solution as, over time, the blockage will build back up quickly. Complete clogs are much more difficult to handle and must be handled professionally by people who have the right tools at their disposal.

You may get a strainer for sinks that collects all the dirt, hair, and debris that enable the water to flow easily. A strainer can be put in the shower or bath together with the kitchen sink. When you need to dispose of grease then make sure you don’t pour it into the sink. Rather take a jar for storing oil that can later be taken to a recycling

Corrosion of pipes

Pipes are a significant concern when it comes to the condition of your building. It’s important you take time each week to inspect any corroding or rusting on these pipes and make sure it’s taken care of ASAP before it can cause more damage or inconvenience to you or your tenants.

There are some reasons that can cause the appearance of rust inside your pipes including oxygen in the water. Another reason for the appearance of said rust is when the water flowing through your pipes has a relatively low level of pH. Though this problem is typically seen in copper, lower levels of pH could destroy the protective layer around your piping, allowing rust to appear more easily.

Low water pressure

If you find droplets of water coming out of your tap, chances are the water pressure is low. It is advised to first check all top most faucets to make sure that none of them are dripping as this can be one of the main reasons behind low water pressure in a home.

It is very important to check all faucets in your house before determining whether you have low water pressure. One at a time, run the hot water in each room to see if there is an issue only here or if it has spread. When the cold water is running it’s important not to get too distracted and misjudge the temperature.

At no point should you pull back the shower curtain because you are likely to get drenched while stepping out of your bath? When there is only one location that has issues with water pressure, it is more likely caused by your heater than anything else!

If you’re experiencing low water pressure in some of the taps in your house, it’s possible that the faucet aerator is clogged. You can try cleaning it out by soaking the inside of it with equal parts vinegar and water. Once this is done, you might want to test if the pressure has returned back to normal. However, if that doesn’t solve the problem at all then you’ll need to replace the aerator altogether since replacing an aerator is easier than replacing a faucet.

A Professional Plumber is just one call away

Whatever plumbing issues you have right now, Plumbers Derby is here to help, we provide the highest possible quality of different plumbing and heating services across Derbyshire. Dial 01332 215555 and get your No-Cost Quotation right away!


Plumbers Derby – A Guide on How to Choose the Best Plumber

0 Comments

A Guide on How to Choose the Best Plumber

Finding a plumber can be hard, but it is possible to do it the right way. There are some things you can do to make sure you get the best plumber for your needs. Here are some tips on how to choose the best plumber: 

  • Ask neighbours or friends if they know anybody. Word of mouth is a great way to find a plumber. If you have a good experience with a plumber, you can tell your friends about it and they will likely tell others. 
  • Check reviews. Reviews can help you know how well a plumber does their job. Check the reviews on Google, Yelp, and Angie’s List. The more reviews a plumber has, the more qualified they are. 
  • Compare prices. The lowest price isn’t always the best one. Don’t choose the plumber based on the lowest price. 
  • Find out if the plumber has insurance. Insurance is an indication that the plumber is more qualified and has more experience. Check if the plumber has the right tools. The right tools are an indication of how well the plumber can do the job. If a plumber has the right tools, it shows that he or she is well-qualified.
  • For emergency instances ask if the plumber will charge a call-out fee to set your proper expectations.

Make sure that the quotation they gave you is a fixed price.

Just like everything else, you can always expect that a plumber’s price is a fixed price. A plumber’s price is a fixed price. From what I see, there are a lot of people that don’t really know this. It is always better to get a plumber to quote you a price even if you are not going to use them. You should be aware that you pay for a plumber by the hour. That is why it is important that you know what the job is going to cost you before you call them.

When exactly does the plumber want to get paid and what are the payment options?

It’s always best to ask, when exactly does the plumber want to get paid and what are the payment options, so that you will be financially prepaid before the service appointment.

What if anything gets damaged during the process?

Most plumbers have insurance to cover any damages or mishaps that might occur during the process. However, not all plumbers have insurance, so make sure you inquire whether or not they have insurance before they begin working. If they don’t, you might have to cover any damages that might occur during the process.

Ask the plumber if cleaning up the mess is included in their service.

Some plumbers charge extra for them to clean up the mess once the job is finished. That’s why you need to make sure if it is part of their service or not to avoid any sort of misunderstandings along the way.

Give us a ring now!

Whether it’s a boiler installation, an emergency gas leak repair, or anything in between, we do it all! Our plumbers are Gas Safe (GS) registered – and when it comes to plumbing problem-solving and maintaining, working with the best is of paramount importance. So whether you’re looking for a smart thermostat, system maintenance or repairs, bathroom fitting and all things installation, or simply a new sink or tap… we can look after that too! Call us on 01332 215555 right away and get your Totally-Free, No-Pressure Quotation.